|
|
|
| EFI Fuel pumps | ||
| Pro Series 11102 | ||
| -12 inlet and outlets | ||
| Flows 900 lbs. per hour @13.5v and 45psi | ||
| Supports 1800hp naturally aspirated/1250hp blown | ||
| Comes with 12AN fittings and o-rings | ||
| Eliminator Series 11104 | ||
| -12 inlet and -10 outlet | ||
| Flows 650 lbs. per hour @13.5v and 45psi | ||
| Supports 1200hp naturally aspirated/900hp blown | ||
| |
||
| A1000 11101 | ||
| -10 inlet and outlet | ||
| Flows 500 lbs. per hour @12v and 45psi | ||
| Supports 1000hp naturally aspirated/700hp blown | ||
| |
||
| Carb Fuel pumps | ||
| A2000 11202 | ||
| -10 inlet and outlet ports with -8 return | ||
| Free flows more than 350 gallons per hour | ||
| Supports up to 2000hp | ||
| |
||
| Street Rod 11203 | ||
| 3/8" Pipe inlets and outlets | ||
| Flows more than 150gph | ||
| Supports up to 750hp | ||
|
|
|
|
| Fuel Injected Regulators | ||
| A1000 13101 | ||
| Adjustable from 30 to 70psi | ||
| Two -10 inlets and -6 return | ||
| 1/8" pipe gauge port | ||
| |
||
| Ford EFI 13102 & 13103 | ||
| Adjustable from 35 to 70psi | ||
| 1/8" pipe gauge port | ||
| 13102 replaces 2 bolt | ||
| 13103 replaces 3 bolt | ||
| |
||
| GM LT1 13106 & 13107 | ||
| Adjustable from 35 to 70psi | ||
| 13106 for '92-'96 Vette and '93 F-body cars | ||
| 13107 for '94-'97 F-body and '94-'96 Impala SS | ||
| Pro Series 13110 | ||
| Adjustable from 30 to 60psi | ||
| Supports up to 2000hp | ||
|
|
|
|
| Carb Regulators | ||
| A1000 13204 (Bypass) | ||
| Designed for the A1000 pump | ||
| -10 inlet, -8 return, (2) -6 feed | ||
| Boost sensitive with 1:1 ratio | ||
| 1/8" pipe gauge port | ||
| |
||
| A4 13203 | ||
| Designed for the A2000 pump | ||
| (2) -10 inlets, (4) -6 outlets | ||
| 1/8" pipe gauge port | ||
|
|
|
|
| Fuel Systems and Accessories | ||
| Back Half kit 17103 | ||
| Comes with sumped fuel tank, A1000 fuel pump, braided line, | ||
| hose ends, fittings, and wiring kit | ||
| Competition kit 17105 | ||
| Consists of Back Half kit, 5.0 Street Rail kit, A1000 regulator, | ||
| and a Y-block | ||
| Eliminator kit 17106 | ||
| Consists of Competition kit with Eliminator fuel pump | ||
| 5.0 Street Rail kit 14102 | ||
| -8 fuel rail ports, direct bolt-on, adjustable regulator (pictured above) | ||
| 5.0 Rails only 14101 | ||
| -8 ports, direct bolt-on | ||
| 5.0 Sumped Fuel tank 18601 | ||
| Innovative sump features -10 outlets and -8 return port, 1983-95 | ||
| Pro Series fuel filter 12302 | ||
| -12 inlet and outlet with 100-micron stainless steel element | ||
| Fuel filter 12301 | ||
| -10 inlet and outlet with 10-micron paper element | ||
| Fuel filter 12304 | ||
| -10 inlet and outlet with 100-micron stainless steel element | ||
| Billet Fuel pump controller 16302 | ||
| A voltage stepper that senses rpm and delivers the voltage needed | ||
|
|
|
|
| CALL 662-280-7600 FOR ORDERING/INFORMATION! | ||
|
 |
 |
 |
